Cabinets

Owned by Guillaume Robitaille
Last updated: Nov 25, 2019
3 min read

The Cabinets Tag is used to transfert a value that Cabinet Vision will use to build the cabinet in Cabinet Vision.

When Selected the ORD tab of the Feature Window will look like the following.

The Cabinets Tag can’t be used to transfer a manual value. This is a Feature Value, it mean that if you chose this Feature, the specified value will be transfered into the ord.

There is 6 types that we will use with the Catalog :

 

Name - The Name type can be used if we want the product to be renamed if this feature is selected

Example : if we add a base 1 door (BF) to our quotation and we select the feature to add 2 roll out,

Cieblink will rename the product in the ORD to BF_2RO because the product in CV is named BF_2RO.

 

Material Recipe - The Material Recipe type is use to transfer the Cabinet Vision material recipe specific name.

The Material Recipe Value must be exactly the same has the Cabinet Vision Cabinet Material recipe name.

 

Finished Side - The Finished Side type is use to tell Cabinet Vision wich side of the cabinet is finished.

For the Value you need to use one of the following values :

* = Undefined

B = Cabinet has both ends finished

L = Cabinet has left finished end

R = Cabinet has right finished end

N = Cabinet has both ends unfinished

Cabinet Type : You need to select wich Cabinet Vision Class you want the ord to output this value.

The choosen Cabinet Type is used by Cieblink to know where to place the cabinet on the wall and used in Cabinet Vision to tell CV how to build the cabinet.

 

 

 

Hinged Side - The Hinged Side type is used to tell Cabinet Vision how the cabinet is hinged.

For the Value you need to use one of the following values :

* = Undefined

P = Cabinet has a pair of doors

L = Cabinet is left hinged

R = Cabinet is right hinged

T = Cabinet is top hinged

B = Cabinet is bottom hinged

 

Catalog - The Catalog type is used to tell Cabinet Vision in wich catalog it need to pick the selected cabinet.

The Value must match the Cabinet Vision catalog name.

 

Cabinet Construction - The Cabinet Construction type is used to tell Cabinet Vision wich construction need to be applied to the cabinet.

The Cabinet Construction Value must be exactly the same has the CV Cabinets Construction name.